FixVault
Home › Chevrolet › 2006 › SSR Automatic › Repair and Diagnosis › External Pages › Different car › Section 100 (Wiper System & Washer System) › Repair Instructions › Windshield Outside Moisture Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Rain Sensor Module
    GM746991Courtesy of GENERAL MOTORS CORP.
  1. Connect the windshield outside moisture sensor electrical connector.
  2. Position the windshield outside moisture sensor to the windshield coupler.
  3. Fasten the windshield coupler retainer clips.
    4. Fig 2: View Of Windshield Outside Moisture Sensor Trim Cover
    GM746989Courtesy of GENERAL MOTORS CORP.
  4. Position the trim cover to the windshield outside moisture sensor.
  5. Press the trim cover inward to secure the trim cover to the windshield outside moisture sensor.
About FixVault