Rear Toe Adjustment
WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the rear suspension adjustment link lock nut (1).
- Rotate the inner tie rod (2) to the required toe specification setting. Refer to Wheel Alignment Specifications .
- Tighten the rear suspension adjustment link lock nut.
Tighten: Tighten the rear suspension adjustment link lock nut to 60 N.m (44 lb ft).
- Check the toe setting after tightening.
- Adjust the toe setting if necessary.
NOTE:
Refer to Fastener Notice
.