Lumbar Switch Replacement
WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Lumbar Switch Replacement
| Callout | Component Name |
|---|---|
|
NOTE:
Refer to Fastener Notice
. Fastener Tightening Specifications:
Refer to Fastener Tightening Specifications . |
|
| 1 | Clip, Recliner Handle Retainer |
| 2 | Handle, Recliner Tip: Using a flat-bladed tool, push the retainer clip downward and pull outward to release the handle. |
| 3 | Knob, Lumbar Switch (Qty: 2) |
| 4 | Knob, Power Seat Switch |
| 5 | Screw, Shield Attachment Tighten: 3 N.m (27 lb in) |
| 6 | Side Shield |
| 7 | Switch Assembly, Lumbar |