Installation Procedure

WARNING: This page is about a different car, the 2006 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing The Radiator Support

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Position the radiator support in the correct relationship to the fan shroud.

Install the radiator support.

Fig 2: Radiator Support
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.
Install the radiator support bolts.
Tighten: Tighten the bolts to 9 N.m (80 lb in).

Fig 3: Connecting The Surge Tank Inlet Hose Assembly

Courtesy of GENERAL MOTORS CORP.

Connect the surge tank inlet hose assembly to the radiator support tabs.
Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls - 6.0L.