FixVault
Home › Chevrolet › 2006 › SSR Automatic › Repair and Diagnosis › External Pages › Different car › Section 89 (Supplemental Inflatable Restraint System) › Repair Instructions › Inflatable Restraint Side Impact Module Wiring Harness Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Inflatable Restraint Side Impact Module Wiring Harness At Seat Frame With Retaining Clips
    GM1276234Courtesy of GENERAL MOTORS CORP.
  1. Install the new inflator module wiring harness to the seat. Install the retaining clips that secure the wiring harness to the seat.
  2. Install the side impact inflator module to the seat. Refer to Inflatable Restraint Side Impact Module Replacement - Front .
  3. Enable the SIR system. Refer to SIR Disabling and Enabling .
About FixVault