Installation Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Steering Gear Nut & BPMV Bracket

Courtesy of GENERAL MOTORS CORP.

Install the EBCM/BPMV bracket to the crossmember.

NOTE: Refer to Fastener Notice .

Install the bracket bolts to the EBCM/BPMV bracket.
Tighten: Tighten the bolts to 27 N.m (20 lb ft).
Install the steering gear bolt and nut.
Tighten: Tighten the nut to 100 N.m (74 lb ft).
Install the EBCM/BPMV assembly into the bracket.