Installation Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Antenna Wire Harness, Retaining Bracket & Lead Connector

GM1231039

Courtesy of GENERAL MOTORS CORP.

Position the antenna to the I/P carrier.
Connect the wire harness lead to the antenna.
Push on the antenna to install the antenna to the retaining bracket.
Install the I/P compartment. Refer to Instrument Panel Compartment Replacement .
Close the I/P compartment door.