FixVault
Home › Chevrolet › 2006 › SSR Standard › Repair and Diagnosis › External Pages › Different car › Section 20 (Power Roof System) › Repair Instructions › Weatherstrip Replacement - Lift Off Panel › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Using a 50/50 mix of soap and water (lubricant ) on the back side of the weatherstrip this will aid in the reinstalling the weatherstrip to the retainer. Push firmly on the front and rear ends of the weatherstrip to ensure that the butyl bead is secured to the frame.
    Fig 1: Installing The Weatherstrip Into The Retainer
    GM1675756Courtesy of GENERAL MOTORS CORP.
  1. Install the weatherstrip into the retainer.
    2. Fig 2: Sunroof View
    GM63735Courtesy of GENERAL MOTORS CORP.
  2. Install the roof panel.
About FixVault