FixVault

Installation Procedure

WARNING: This page is about a different car, the 2006 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Ignition Lock Antenna & Bracket
GM1231045Courtesy of GENERAL MOTORS CORP.
  1. Push on the antenna to engage the antenna to the retaining bracket.
  2. Connect the antenna wire lead to the antenna.
  3. Install the rear window trim panel. Refer to Trim Panel Replacement - Rear Compartment Front Side in Interior Trim.
  4. Install the right lock pillar trim. Refer to Trim Replacement - Lock Pillar in Interior Trim.