Reinitialization of the Power Window
WARNING: This page is about a different car, the 2006 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
The reinitialization of the power window will be necessary anytime a door module has been disconnected or replaced. The power window will be reinitialized when the door module learns the full up and full down positions.
To reinitialize a power window:
- Close the door for the window being reinitialized.
- Turn ON the ignition, with the engine OFF.
- Run the window to the full up position and hold the switch continuously for a minimum of 0.5 seconds.
- Run the window to the full down position and hold the switch continuously for a minimum of 0.5 seconds.