FixVault
Home › Chevrolet › 2006 › SSR Standard › Repair and Diagnosis › External Pages › Different car › Section 90 (Supplemental Inflatable Restraint System) › Repair Instructions › Inflatable Restraint Side Impact Sensor Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Refer to SIR Inflator Module Handling and Storage Caution .
  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the front side door trim panel. Refer to Front Side Door Trim Panel Replacement - Driver Side or Front Side Door Trim Panel Replacement - Passenger Side .
    3. Fig 1: Inflatable Restraint Side Impact Sensor & Retaining Bolts
    GM1226209Courtesy of GENERAL MOTORS CORP.
  3. Remove the retaining bolts from the inflatable restraint side impact sensor.
  4. Remove the sensor from the vehicle.
About FixVault