FixVault
Home › Chevrolet › 2006 › Uplander Base › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Computer/Integrating Systems › Diagnostic Information and Procedures › Scan Tool Output Controls

Scan Tool Output Controls

Scan Tool Output Controls

Scan Tool Output Control Additional Menu Selection Description
Ignition Power Relay Miscellaneous Test This output control commands the Ignition 1 (IGN 1) relay On and Off. When the relay is commanded ON it will supply the following devices with B+:
  • The ABS Functions
  • The AC compressor relay
  • The Crank relay
  • The HVAC control head
  • The IPC
  • The PCM
  • The SDM
  • The Transmission solenoids
Retained Accessory Power Miscellaneous Test Commands RAP relay On/Off for 5 seconds to check equipment response
About FixVault