FixVault

Removal Procedure

  1. Remove the front door water deflector. Refer to Water Deflector Replacement - Front Door .
  2. Fig 1: View Of Front Door Inside Handle Lock Module
    GM512954Courtesy of GENERAL MOTORS CORP.
  3. Using a small flat-bladed tool, remove the front door inside handle from the lock module.
  4. Fig 2: View Of Door Inside Handle Assembly
    GM512948Courtesy of GENERAL MOTORS CORP.
  5. Pull back on the door inside handle assembly.
  6. Fig 3: View of Front Door Inside Handle Rods
    GM512946Courtesy of GENERAL MOTORS CORP.
  7. Separate the upper and lower portions from each other. Slide the upper and lower portions off the lock rods.