Removal Procedure

IMPORTANT: By removing the power sliding door (PSD) 15A fuse, the low current logic power for both the LH and RH power sliding door modules (PSDM) will be interrupted and both PSDs will be inoperative.

If equipped with a power sliding door, disable the PSD system by removing the PSD 15A fuse from the instrument panel (I/P) fuse block.
Use J 42506-A in order to remove the inside door handle clip. See Special Tools .

Fig 1: Identifying Inside Handle

Courtesy of GENERAL MOTORS CORP.

Remove the inside handle from the sliding door.