FixVault
Home › Chevrolet › 2006 › Uplander Base › Repair and Diagnosis › External Pages › Different car › Section 123 (Front Suspension System) › Repair Instructions › Strut Assembly Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Strut Upper Mounting Nuts
    GM1209238Courtesy of GENERAL MOTORS CORP.
  1. Remove the strut upper mounting nuts.
    2. IMPORTANT: Lift the vehicle using ONLY a frame-contact vehicle lift. Do NOT lift the vehicle using a suspension-contact vehicle lift.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  3. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
    4. Fig 2: Scribing Strut To Knuckle
    GM385558Courtesy of GENERAL MOTORS CORP.
  4. Scribe the strut to the knuckle.
    5. Fig 3: View Of Steering Knuckle To Strut Bolts
    GM385564Courtesy of GENERAL MOTORS CORP.
  5. Remove the strut lower bolts and nuts.
  6. Remove the strut.
About FixVault