Installation Procedure
WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Insert the end of the replacement cable (3 or 4) into the drive screw.
- Bend the cable and insert the other end into the motor (1 or 2).
- If required, repeat the above procedure for the second drive cable.
- Connect the electrical connector to the seat wire harness and test the seat for proper operation.
- Install the front seat. Refer to Seat Replacement - Front Bucket .
IMPORTANT:
Examine all 4 drive cables to ensure that the cables are straight.