FixVault

Installation Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Power Port Electrical Cable & Front Hook Attachments
    GM1368199Courtesy of GENERAL MOTORS CORP.
  1. Position the center seat in the vehicle.
  2. Insert front hook attachments (2) into the floorpan.
  3. Connect the power port electrical cable (1) on the right side of the seat.
  4. Install the two front bucket seats. Refer to Seat Replacement - Front Bucket .