FixVault
Home › Chevrolet › 2006 › Uplander Base › Repair and Diagnosis › External Pages › Different car › Section 140 (Disc Brake System) › Repair Instructions › Disc Brake Backing Plate Replacement - Rear › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Backing Plate & Wheel Bearing/Hub
    GM1228560Courtesy of GENERAL MOTORS CORP.
  1. Install the backing plate (2) to the knuckle (1).
  2. Install the wheel bearing/hub (3). Refer to Wheel Bearing/Hub Replacement - Rear in Rear Suspension
About FixVault