Removal Procedure

WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Always maintain cleanliness when servicing fuel system components.

Fig 1: Disconnecting The Fuel Level Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Remove the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
Disconnect the fuel level sensor electrical connector (1).

Fig 2: Pushing In The Fuel Level Sensor Retainer

Courtesy of GENERAL MOTORS CORP.

Push in the fuel level sensor retainer (1).

Fig 3: Sliding The Fuel Level Sensor Downward And Off Of The Bucket

Courtesy of GENERAL MOTORS CORP.

Slide the fuel level sensor (1) downward and off of the bucket.