Installation Procedure

WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Inflatable Restraint Side Impact Module Wiring Harness At Seat Frame With Retaining Clips

Courtesy of GENERAL MOTORS CORP.

Install the new inflator module wiring harness to the seat. Install the retaining clips that secure the wiring harness to the seat.
Install the side impact inflator module to the seat. Refer to Inflatable Restraint Side Impact Module Replacement - Front (Monte Carlo) .
Enable the SIR system. Refer to SIR Disabling and Enabling Zone 7 or SIR Disabling and Enabling Zone 9 (Monte Carlo) or SIR Disabling and Enabling Zone 9 (Impala) .