Disassembly Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Monte Carlo and 2007 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Remove the strut from the vehicle. Refer to Strut Assembly Replacement .

Fig 1: Compressing/Releasing Lower Part Of Shock Spring
Courtesy of GENERAL MOTORS CORP.
Install the strut (2) in the J 45400 (1).
Turn the spring compressor forcing screw (1) until the coil spring (2) is compressed.

Fig 2: View Of Compressor Forcing Screw & Coil Spring
Courtesy of GENERAL MOTORS CORP.

IMPORTANT: The spring is compressed when the strut moves freely.

Fig 3: Removing/Installing Strut Retaining Nut

Courtesy of GENERAL MOTORS CORP.

Use a 45 TORX® socket in order to hold the strut shaft. Remove the upper strut mount nut by turning with J 42991 .
Remove the strut from the J 45400 .
Loosen the compressor forcing screw (1) until the upper strut mount and coil spring (2) may be removed.

Fig 4: View Of Compressor Forcing Screw & Coil Spring
Courtesy of GENERAL MOTORS CORP.
Remove the upper strut mount and the coil spring from the J 45400 .