Installation Procedure
WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Install the drive axle retainer rings (509) to the output shaft (510).
- Hold the front differential carrier in place and carefully install the output shaft (510) to the transmission through the left wheel opening. Extend the output shaft through the differential side gear.
- Install the case extension housing. Refer to Case Extension Housing Replacement .
- Install the left drive axle to the transaxle. Refer to Wheel Drive Shaft Replacement .