FixVault
Home › Chevrolet › 2006 › Uplander Base › Repair and Diagnosis › External Pages › Different car › Section 52 (HVAC System - Automatic) › Repair Instructions › HVAC Control Module Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel lower trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Lower (w Floor Console) or Trim Plate Replacement - Instrument Panel (I/P) Lower (w/o Floor Console) in Instrument Panel, Gages, and Console.
    2. Fig 1: HVAC Control Module Mounting Screws
    GM1396621Courtesy of GENERAL MOTORS CORP.
  2. Remove the HVAC control module mounting screws (1).
    3. Fig 2: HVAC Control Module
    GM1396877Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Retaining clips hold the HVAC control module in place.
  3. Pull the HVAC control module rearward from the instrument panel.
  4. Disconnect the electrical connectors form the HVAC control module.
  5. Remove the HVAC control module.
About FixVault