FixVault
Home › Chevrolet › 2006 › Uplander Base › Repair and Diagnosis › External Pages › Different car › Section 84 (Cellular Communication Systems) › Repair Instructions › Bracket Replacement - Vehicle Location Antenna Module › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Vehicle Location Antenna Module Bracket Bolts
    GM1204600Courtesy of GENERAL MOTORS CORP.
  1. Remove the instrument panel (I/P) trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) in Instrument Panel, Gages and Console.
  2. Remove the vehicle location antenna module bracket bolts (3, 4, 5).
  3. Remove the communication interface module screws.
  4. Lower the communication interface module to the floor.
    5. Fig 2: View Of Antenna Module Bracket
    GM1202535Courtesy of GENERAL MOTORS CORP.
  5. Remove the vehicle location antenna module bracket.
About FixVault