Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Antenna Extension Cable

Courtesy of GENERAL MOTORS CORP.

Remove the left lower pillar garnish molding. Refer to Garnish Molding Replacement - Lower Pillar in Interior Trim.
Remove the left instrument panel (I/P) insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.
Disconnect the antenna extension cable (1) from the antenna cable.

Fig 2: View Of Instrument Panel Wiring Harness Connectors

Courtesy of GENERAL MOTORS CORP.

Remove the radio. Refer to Radio Replacement .
Cut off the visible ends of the antenna extension cable.