FixVault
Home › Chevrolet › 2007 › Aveo Base › Repair and Diagnosis › Body & Frame › Door Locks › Keyless Entry System And Remote Functions › Repair Instructions › Remote Control Door Lock Receiver Replacement › Installation Procedure

Installation Procedure

    Fig 1: View of Control Module/Receiver
    GM1252096Courtesy of GENERAL MOTORS CORP.
  1. Install the control module/receiver on its mounting bracket.
  2. Connect the control module/receiver electrical connector.
  3. Install the floor console. Refer to Front Floor Console Replacement .
  4. Connect the negative battery cable.
About FixVault