FixVault
Home › Chevrolet › 2007 › Aveo Base › Repair and Diagnosis › Body & Frame › Door Locks › Theft Deterrent System › Repair Instructions › Theft Deterrent Module Replacement › Installation Procedure

Installation Procedure

    Fig 1: View of Electrical Connector From Immobilizer Control Unit
    GM1252101Courtesy of GENERAL MOTORS CORP.
  1. Install the immobilizer control unit.
  2. Connect the electrical connector to the immobilizer control unit.
    3. Fig 2: View of Instrumental Panel Lower Cover
    GM1248378Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: After replacing the immobilizer, the keys must be re-authorized using the key coding procedure. Refer to appropriate Programming Theft Deterrent System Components procedures- Tech 2  or Scan 100 .
  3. Install the instrument panel lower cover.
About FixVault