FixVault
Home › Chevrolet › 2007 › Aveo Base › Repair and Diagnosis › Engine Performance › System › Engine Controls & Fuel - 1.6L - Introduction (2 Of 2) › Repair InstructionsEngine Control Module Replacement › Air Cleaner Inlet Duct ReplacementRemoval Procedure › Removal ProcedureInstallation Procedure

Removal ProcedureInstallation Procedure

  1. Turn OFF the ignition.
  2. Disconnect the electrical connector from the intake air temperature (IAT) sensor.
  3. Disconnect the breather tube from the air cleaner intake duct.
    4. Fig 1: Locating Intake Ducting To Engine
    GM1241530Courtesy of GENERAL MOTORS CORP.
  4. Loosen the clamps securing the air cleaner intake duct.
  5. Remove air cleaner intake duct.
About FixVault