FixVault
Home › Chevrolet › 2007 › Aveo Base › Repair and Diagnosis › Engine Performance › System › Engine Controls & Fuel - 1.6L - Introduction (2 Of 2) › Repair InstructionsEngine Control Module Replacement › Evaporative Emission Canister ReplacementRemoval Procedure › Installation ProcedureIgnition Coil Replacement

Installation ProcedureIgnition Coil Replacement

    Fig 1: Identifying Canister Flange to Vehicle Bolt
    GM1289477Courtesy of GENERAL MOTORS CORP.
  1. Insert the canister into the track and slide it into position.
    2. NOTE: Refer to Fastener Notice .
  2. Connect the canister fuel vapor hoses.

    Tighten:  Tighten the evaporative emission (EVAP) canister flange bolt to 4 N.m (35 lb in).

  3. Install the canister flange bolt.
About FixVault