FixVault
Home › Chevrolet › 2007 › Aveo Base › Repair and Diagnosis › External Pages › Different car › Section 10 (Lighting Systems) › Repair Instructions › Repeater Lamp Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Side Turn Signal Lamp
    GM1248417Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector.
  2. Install the side turn signal lamp.
  3. Connect the negative battery cable.
About FixVault