FixVault
Home › Chevrolet › 2007 › Aveo Base › Repair and Diagnosis › External Pages › Different car › Section 11 (Supplemental Inflatable Restraint System) › Repair Instructions › Inflatable Restraint Instrument Panel Module Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the passenger air bag module.
    2. Fig 1: Air Bag Module Mounting Bolts
    GM1724866Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  2. Install the passenger air bag module mounting bolts to the tie bar.

    Tighten:  Tighten the passenger air bag module mounting bolts to 15 N.m (11 lb ft).

    3. Fig 2: Passenger Air Bag Module Mounting Bolts
    GM1724868Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  3. Install the passenger air bag module mounting bolts to the upper instrument panel.

    Tighten:  Tighten the passenger air bag module mounting bolts to 6 N.m (53 lb in).

  4. Install the instrument panel. Refer to Instrument Panel Assembly Replacement (Notchback) or Instrument Panel Assembly Replacement (Hatchback) .
    5. Fig 3: Passenger Air Bag Yellow Electrical Connector
    GM1724863Courtesy of GENERAL MOTORS CORP.
  5. Connect the passenger air bag yellow electrical connector (1).
  6. Install the glove box. Refer to Instrument Panel Storage Compartment Replacement .
  7. Connect the negative battery cable.
About FixVault