FixVault
Home › Chevrolet › 2007 › Aveo Base › Repair and Diagnosis › Transmission › Manual Transaxle - D16 › Repair Instructions › Shift Control Linkage Replacement › Removal Procedure

Removal Procedure

    Fig 1: Clip, Bolt & Universal Joint
    GM1248177Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Remove the rod clamp. Refer to Shift Linkage Adjustment .
  3. Remove the clip and the bolt from the universal joint.
  4. Separate the universal joint from the transaxle.
    5. Fig 2: Transaxle Rear Mounting Bracket
    GM1248179Courtesy of GENERAL MOTORS CORP.
  5. Remove the fixing shaft pin and separate the linkage connection part from the transaxle rear mounting bracket.
  6. Remove the shift linkage assembly.
About FixVault