FixVault
Home › Chevrolet › 2007 › Chevy Express G2500, Van Cargo Extended, 6.6 2 › Repair and Diagnosis › Body & Frame › Windows › Fixed & MOVEABLE Window Systems › Repair Instructions › Power Window Motor Replacement › Installation Procedure

Installation Procedure

    Fig 1: Front Door Module, Power Window Motor & Nuts
    GM333948Courtesy of GENERAL MOTORS CORP.
  1. Install the power window motor (2) to the vehicle.
    2. NOTE: Refer to Fastener Notice .
  2. Install the nuts (3) in order to retain the power window motor (2) to the front door module (1).

    Tighten:  Tighten the retaining nuts to 11 N.m (97 lb in).

  3. Install the electrical connector to the power window motor (2).
  4. Install the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
  5. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
About FixVault