FixVault
Home › Chevrolet › 2007 › Chevy Express G2500, Van Cargo Extended, 6.6 2 › Repair and Diagnosis › Body & Frame › Windows › Fixed & MOVEABLE Window Systems › Repair Instructions › Window Channel Replacement › Removal Procedure

Removal Procedure

  1. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Remove the front door rear garnish. Refer to Front Side Door Rear Garnish Molding Replacement .
  3. Remove the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
  4. Lower the front door window.
  5. Remove the inner window sealing strip. Refer to Front Side Door Upper Auxiliary Sealing Strip Replacement .
  6. Remove the outer window sealing strip. Refer to Outer Belt Sealing Strip Replacement .
    7. Fig 1: Front Run Channel & Bolt
    GM568214Courtesy of GENERAL MOTORS CORP.
  7. Remove the bolt (2) that retains the front run channel (1) to the door.
  8. Remove the front run channel (1) from the door.
  9. Raise the front window approximately half way in order to access the nuts that retain the front door window to the sash. Access the nuts through the holes in the front door module.
  10. Remove the nuts that retain the front door window to the sash.
    11. Fig 2: Rear Run Channel & Bolt
    GM568219Courtesy of GENERAL MOTORS CORP.
  11. Remove the front door window from the door from the outside of the vehicle.
  12. Remove the bolt (2) that retains the rear run channel (1) to the door.
  13. Remove the rear run channel (1) from the door.
About FixVault