FixVault
Home › Chevrolet › 2007 › Chevy Express G2500, Van Cargo Extended, 6.6 2 › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Repair Instructions › Front Seat Belt Retractor Replacement › Installation Procedure

Installation Procedure

    Fig 1: Shoulder/Seat Belt Retractor Assembly Mounting
    GM158293Courtesy of GENERAL MOTORS CORP.
  1. Install the shoulder/seat belt retractor assembly to the vehicle.
    2. NOTE: Refer to FASTENER NOTICE .
  2. Install the shoulder/seat belt retractor retaining bolt to the lower pillar.

    Tighten:  Tighten the shoulder/seat belt retractor retaining bolt to 52 N.m (38 lb ft).

  3. Install the front door lower pillar garnish molding. Refer to Lower Pillar Garnish Molding Replacement .
  4. Install the front door upper pillar garnish molding. Refer to Upper Pillar Garnish Molding Replacement .
    5. Fig 2: Bolt Retaining Shoulder/Seat Belt Guide
    GM158290Courtesy of GENERAL MOTORS CORP.
  5. Install the shoulder/seat belt guide to the shoulder belt guide adjuster.
  6. Install the upper shoulder/seat belt guide retaining bolt to the vehicle.

    Tighten:  Tighten the upper shoulder/seat belt guide retaining bolt to 10 N.m (89 lb in).

    7. Fig 3: Installing Shoulder/Seat Belt Guide
    GM887183Courtesy of GENERAL MOTORS CORP.
  7. Install the shoulder/seat belt guide to the guide adjuster cover (1).
About FixVault