Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 GMC Savana Special, 2006 GMC Savana Camper Special, 2006 GMC Savana, 2006 Chevrolet RV Cutaway, and 2006 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the hood.
Remove the air cleaner assembly from the vehicle.
- For the 4.3L engine, refer to Air Cleaner Assembly Replacement in Engine Controls - 4.3L.
- For the 4.8L, 5.3L, and 6.0L engine, refer to Air Cleaner Assembly Replacement in Engine Controls - 4.8L, 5.3L, and 6.0L.
Disconnect the electrical connector from the cruise control module.
Disconnect the cruise control cable from the cruise control module. Refer Cruise Control Cable Replacement .

Fig 1: Removing Nuts That Retain Cruise Control Module To Cruise Control Bracket

Courtesy of GENERAL MOTORS CORP.

Remove the nuts (2) that retain the cruise control module to the cruise control bracket.
Remove the cruise control module (3) from the cruise control bracket (1).
Remove the cruise control module (3) from the vehicle.