FixVault
Home › Chevrolet › 2007 › Corvette Base, 2D Convertible, Automatic › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Pulley Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Power Steering Pump Pulley Remover
    GM649303Courtesy of GENERAL MOTORS CORP.
  1. Remove the brake pressure modulator valve (BPMV). Refer to Brake Pressure Modulator Valve Replacement in Antilock Brake System.
  2. Remove the brake pressure modulator valve (BPMV) bracket. Refer to Brake Pressure Modulator Valve Bracket Replacement in Antilock Brake System.
  3. Remove the accessory drive belt. Refer to Drive Belt Replacement - Accessory in Engine Mechanical-6.0L.
  4. Install the J 25034-C  on the power steering pump pulley and remove the pulley.
About FixVault