ECM Reprogramming
- Record Fuel Filter Life.
- Enable ECM Reprogramming-Refer to Service Programming System (SPS) .
- Reset Fuel Filter Life to the recorded value.
- Start and idle vehicle.
- Using the scan tool, perform the Turbocharger Learn Procedure-Refer to Turbocharger Learn .
- If necessary, perform the following:
- Theft Deterrent-Refer to Programming Immobilizer System Components .
- The Fuel Injector Flow Rate Programming-Refer to Fuel Injector Flow Rate Programming .
- Engine Oil Life Remaining-Use scan tool to reset Engine Oil Life.
IMPORTANT:
It is necessary to record Fuel Filter Life before reprogramming. The ECM reprogramming procedure will reset Fuel Filter Life to zero.
IMPORTANT:
Clear any DTCs that may have set after completing the programming procedure.