Brake Booster Pressure Sensor B Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.

Remove the cowl cover and the under-cowl panel (see COWL COVER REPLACEMENT ).
Remove the nut (A) from the bracket (B).

Fig 1: Bracket And Nut With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the brake booster pressure sensor B 3P connector (C). (Sensor B has a green mark (D) on top.)
Disconnect the vacuum hose (E), then remove the brake booster pressure sensor B (F).
Install the sensor in the reverse order of removal.