FixVault
Home › Chevrolet › 2007 › HHR LS, Automatic › Repair and Diagnosis › Suspension › Front Suspension › Front Suspension System › Repair Instructions › Front Lower Control Arm Bushing Replacement › Installation Procedure

Installation Procedure

  1. Place the NEW bushing to the tapered side of the control arm.
    2. Fig 1: Installing Control Arm Bushing
    GM851698Courtesy of GENERAL MOTORS CORP.
  2. Using the J 41211  , pull the control arm bushing through the opposite direction of the control arm. See Special Tools .
  3. Install the bushing to the same depth and orientation as noted during removal.
  4. Remove the J 41211  from the control arm. See Special Tools .
  5. Install the control arm. Refer to Lower Control Arm Replacement .
About FixVault