Disassembly Procedure

WARNING: This page is about a different car, the 2011 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.

Remove the strut from the vehicle. Refer to Strut Assembly Removal and Installation .

Fig 1: View Of Strut & Spring Compressor

Courtesy of GENERAL MOTORS COMPANY

Install the strut (2) in the J 45400 (1).

NOTE:

The spring is compressed when the strut moves freely.

Turn the spring compressor forcing screw until the coil spring is compressed.

Fig 2: View Of Special Tools & Strut Shaft

Courtesy of GENERAL MOTORS COMPANY

Using a TORX® socket and a strut rod socket, remove the upper strut mount nut.

Fig 3: View Of Compressor Forcing Screw & Coil Spring

Courtesy of GENERAL MOTORS COMPANY

Remove the upper strut mount and the coil spring from the J 45400 .
Remove the strut (2) from the J 45400 .