FixVault
Home › Chevrolet › 2007 › Impala LTZ › Repair and Diagnosis › Body & Frame › Windows › Fixed & MOVEABLE Window Systems › Repair Instructions › Rear Window Replacement › Installation Procedure

Installation Procedure

  1. Install the rear window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows .
  2. Connect the rear window defogger electrical connectors.
    Fig 1: Locating Rear Window Defogger Electrical Connector
    GM401856Courtesy of GENERAL MOTORS CORP.
  3. Install the rear window radio antenna connector.
    Fig 2: View Of Rear Window Radio Antenna Connector
    GM181953Courtesy of GENERAL MOTORS CORP.
  4. Connect the OnStar® antenna, if equipped.

    Check the radio and OnStar® system to verify reception.

  5. Close the rear compartment lid.
  6. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
About FixVault