FixVault
Home › Chevrolet › 2007 › Impala LTZ › Repair and Diagnosis › Engine Mechanical › Engine Mechanical - 3.9L › Repair Instructions › On-Vehicle Repair Instructions › Engine Oil Level Sensor and/or Switch Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying Engine Oil Level Sensor Bolt & Sensor
    GM1609235Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the engine oil level sensor and bolt.

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).

    2. Fig 2: Locating Engine Oil Level Sensor Electrical Connector
    GM1609295Courtesy of GENERAL MOTORS CORP.
  2. Connect the engine oil level sensor electrical connector.
  3. Lower the vehicle.
  4. Refill the crankcase with new engine oil.
About FixVault