FixVault

Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment

WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Tie Rod Jam Nut & Adjuster
    GM564010Courtesy of GENERAL MOTORS CORP.
  1. Ensure that the steering wheel is set in a straight ahead position.
  2. Center the steering wheel position sensor prior to alignment. Refer to Steering Wheel Position Sensor Centering
  3. Loosen the tie rod jam nut (5).
  4. Adjust the toe to specification by turning the adjuster (6). Refer to Wheel Alignment Specifications .
  5. CAUTION: Refer to Fastener Caution .
  6. Tighten the tie rod jam nut (5) to 68 N.m (50 lb ft).