FixVault
Home › Chevrolet › 2007 › Impala SS › Repair and Diagnosis › External Pages › Different car › Section 1094 (Fixed And MOVEABLE Windows) › Repair Instructions › Windshield Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the windshield into the opening with an assistant. Refer to Adhesive Installation of Stationary Windows (Rear Window) , Adhesive Installation of Stationary Windows (Windshield) .
  2. Install the rearview mirror. Refer to Inside Rearview Mirror Replacement .
  3. Install the remote control door lock receiver. Refer to Remote Control Door Lock Receiver Replacement .
  4. Install the interior windshield pillar garnish moldings. Refer to Windshield Pillar Garnish Molding Replacement .
  5. Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement .
  6. Install the windshield wipers arms and blades. Refer to Windshield Wiper Arm Replacement .
  7. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  8. Close the hood.
About FixVault