FixVault
Home › Chevrolet › 2007 › Impala SS › Repair and Diagnosis › External Pages › Different car › Section 211 (Suspension Control System - Suspension Leveling) › Repair Instructions › Automatic Level Control Relay Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    2. Fig 1: Locating Mounting Screw For Automatic Level Control Relay
    GM878217Courtesy of GENERAL MOTORS CORP.
  2. Remove mounting screw (1) from the automatic level control relay.
    3. Fig 2: View Of Electrical Connector For Automatic Level Control Relay
    GM878218Courtesy of GENERAL MOTORS CORP.
  3. Disconnect electrical connector (1) from the automatic level control relay (2).
About FixVault