Removal Procedure
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the ELC/TRAILER fuse.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the automatic level control sensor link from the rear suspension ball stud.
- Remove the ball stud from the rear suspension.
IMPORTANT:
When removing the link, do NOT bend or break the sensor arm.