Installation Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Theft Deterrent Control Module

Courtesy of GENERAL MOTORS CORP.

Install the theft deterrent control module.
NOTE: Refer to Fastener Notice .
Tighten the theft deterrent control module screws.
Tighten: Tighten the screws to 5 N.m (44 lb in).
Install the ignition switch. Refer to Ignition and Start Switch Replacement .
Program the theft deterrent control module after replacement. Refer to Control Module References .