Installation Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Radiator & Cooling Fan Shroud Assembly

Courtesy of GENERAL MOTORS CORP.

Install the radiator to the vehicle.

Fig 2: Identifying Condenser Mounting Tabs

Courtesy of GENERAL MOTORS CORP.

Push upward on the radiator and downward on the condenser to snap the condenser mounting tabs into the radiator clips.

NOTE: Refer to Fastener Notice .

Install new condenser mounting nut to the radiator.
Tighten: Tighten the nuts to 6 N.m (53 lb in).

Fig 3: View Of Radiator/Condenser Lower Mounts

Courtesy of GENERAL MOTORS CORP.

Install new condenser mounting bolts.
Tighten: Tighten the bolts to 6 N.m (53 lb in).
Install the cooling fan and shroud assembly. Refer to Cooling Fan and Shroud Replacement .