Circuit/System Verification
WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
P1A6D, P1A6E
- With a scan tool, clear the DTC.
- Ignition OFF, wait 30 seconds.
- If the DTC is resets , program the SGCM.
- Ignition ON, verify that the latest service software is installed.
- Ignition ON, operate the vehicle within the Conditions for Running the DTC and verify the DTC does not reset.
- If the DTC resets, replace the SGCM.